Views: 24 FAQ Views

Q. How do I print using resume paper?

When you are ready to print your document,

  1. Select Printer Properties
    Select Printer Properties

     
  2. Click on the Paper Source tab
    Select Paper Source Tab

     
  3. Select Multi-purpose Tray from the list
    Select Multi-purpose tray
     
  4. Select OK
     
  5. Select Print
     
  6. Enter your credentials when the PaperCut login comes up
     
  7. Use any of the printers and follow the instructions listed below for using the multi-purpose tray
     

Multi-purpose tray on the Jackson Library Printers

Multi-Purpose Tray

 

  1. Paper Guides
    Adjust the paper guides to precisely the width of the loaded paper to ensure that the paper is fed straight into the machine.

     
  2. Paper Tray
    Open the paper tray when loading the paper.
     
  3. Tray Extension
    Pull out the tray extension when loading large-sized paper.
     

Loading the Paper

 
1. Open the multi-purpose tray.
Open the multi-purpose tray
 
  • Pull out the tray extension when loading large-sized paper.
Pull out the tray extension when loading large-sized paper
 
 

2. Spread the paper guides apart

  • Move the paper guides outward until they are slightly farther apart than the actual width of the paper.

 
 
3. Prepare the paper
  • Fan the paper stack well, and tap it on a flat surface to align the edges.

 
  • Fan all four sides of the paper stack well.
  • Make sure that there is enough air between them.
  • In particular, separate each sheet completely when using transparencies.
     
 
4. Insert the paper into the multi-purpose tray until the paper stops.
insert the paper into the multi-purpose tray until the paper stops
 
  • Load the paper with the print side face down.
 
 
Need additional help? Contact us at: jacksonlibrary@indwes.edu